Industry Leader in Educational Furniture & Casework.
With over 40 years of experience building quality furniture, we are the industry leader in educational furniture and casework. If you visit schools throughout the country, chances are you’ll find Diversified Woodcrafts desks, tables, cabinets and more! From our humble beginning to our 100,000 square foot modern manufacturing plant, it’s a story we are proud of.
Plain Apron Table
These tables are built for years of dependable
service. Legs and aprons are constructed of solid
red oak. They are finished with a chemical resistant, earth-friendly UV finish. All tables are equipped
with non-skid adjustable glides for precise leveling
and for prevention of rocking on uneven floors.
Tables are supplied with black rubber leg boots
which offer protection against scuffing and chemical spills. Standard table height is 30"H with a weight capacity of 500 pounds.
Forward Vision I
This popular workstation allows four students to
work at a single station while all are facing the teacher. The unique design leaves enough room to store four stools (not included) under the workstation. Sink units come with two combination cold water/gas fixtures.
It comes with two GFI electical outlets and ample stoarage. The door cabinet comes with two adjustable shelves. The station is finished with a chemical resistant, earth-friendly UV finish. All doors and drawers lock.
5' Instructor Desk
Complete demonstration center constructed of solid oak hardwood and oak veneers. It is finished with a chemical resistant, earth-friendly UV finish. Included are four drawers and a large cupboard. The drawers are expertly crafted from the finest materials with dovetail joinery throughout. Drawers run on epoxy coated steel glides with nylon bearings for smooth operation. All units come with a GFI protected AC duplex receptacle. unit comes with combination cold water/gas fixture, and polypropylene trap. Comes standard with pull out writing board, support rod with crossbar, rubber base molding and locks for cupboard and all drawers.
Perfect for Makerspaces and Fab-Labs. The legs
are 12-guage steel and have 14-guage stringers
for strength and stability. The steel base is finished
with a gray baked enamel finish. The static weight capacity is 1,400 pounds without casters and 1,000 pounds with casters added. Need storage? Add the
18-guage 8"D shelf. Choose from a thick 1-3/4" thick maple work surface or the 1-1/2" thick ShopTop.
Two-Station Steel Workbench
Base consists of a single-faced heavy guage unit, welded and riveted throughout. The unit provides
six locker openings. Vented doors have spring loaded hinges, padlock hasp, and knockout plug for cylinder locks. Top is constructed of 2-1/4" maple. Available
with or without vises.
Our A-Frame table adds function and beauty to
any space you desire—by customizing a table that
is uniquely yours. The powdercoated metal legs are made of 2-1/2" x 2-1/2" thick wall square steel tubes, with a fully welded 2" x 2" cross brace. The top is supported with an 11-gauge steel “L” channel welded
to the legs and bolted to dual cross-table supports for additional strength. The top is attached with screws in two directions ensuring stability. The table moves effortlessly on heavy-duty locking, swivel casters.
Stainless Steel Work Table w/Galvanized Leg & Under Shelf
Work Table, 72"W x 30"D, 18/430 stainless steel top, with turndown edges on all sides, reinforced with channels, adjustable galvanized undershelf, 1-5/8" dia. galvanized legs, adjustable high-impact corrosion-resistant feet
PLEASE CALL YOUR SALES REP FOR DETAILS, LEAD TIMES & PRICES